Raintree™ Reverse Osmosis Membrane

The Raintree™ Reverse Osmosis Membrane reduces minute impurities as small as 0.0001 micron.

Reduces TDS (total dissolved solids), salts, trace minerals, fluoride, bacteria, viruses, and microplastics

Reverse Osmosis water, in general, is often described as tasting or feeling "flat." Consider using an Alkaline Mineral filter after the RO membrane to replenish some of the beneficial trace minerals that are lost during RO filtration and balance pH for a crisp, refreshing finish. 

• Standard filter replacement ~ 12 months

• Filter lifespan varies depending on usage and source water quality

• Must be used in conjunction with Pre-Filters 

• RO Membranes are chlorine-sensitive. If source water supply is high in chlorine or sediment, the Pre-Filters (Sediment+Carbon and Pre Carbon) should be replaced ~ 6 months

• If source water is high in chlorine or sediment, the Pre-Filters  (Sediment+Carbon and Pre Carbon) should be replaced ~ 6 months

• For use only with potable municipal water supply

2.5” x 12”

Connection to water line: 1/4" poly tubing using standard 1/4" push fittings.

Flow Rate: 50 GPD

Max Pressure: 115 psi

Filtration: 0.0001 micron

Capacity: ~5,000-9,000 gallons

Service Life: 12-36 months

Material: RO Membrane

Flush before use

Made in Korea

• The inlet is on the end with the single port. 

• The center post on the end with two ports is the clean water outlet.

• The outer post on the end with two ports is the waste water outlet.